On-networks N150RM User Manual Instrukcja Użytkownika Pobierz pdf (Strona 32)

Modem Router Setup

N150 Wireless ADSL2+ Modem Router N150RM

3. Click Apply to save the settings.

LAN Ports

The LAN Ports screen allows configuration of LAN IP services such as Dynamic Host

Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The modem router is shipped preconfigured to use private IP addresses on the LAN side and

to act as a DHCP serve

r. The modem router’s default LAN IP configuration is:

• LAN IP addre

ss. 192.168.0.1

• Subnet

mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks

and a

re suitable for most applications. If your network requires a different IP addressing

scheme, you can change these settings in the LAN Setup screen.

 To change the LAN settings:

Note: If you change the LAN IP address of the modem router while

connected through the browser, you will be disconnected. You will

have to open a new connection to the new IP address and log in

again.

1. Select Setup > LAN Setup.

2. Enter the settings that you want to customize. These settings are described in the following

section, LAN TCP/IP Setup.

3. Click Apply to

save your changes.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

Brak uwag

On-networks N150RM User Manual Instrukcja Użytkownika Strona 32